====== Android et USB ======

===== Connecter et détecter le smartphone =====

<note tips>Pas de procédure, juste un mémo des commandes</note>

Commencer par connecter le smartphone sur le port USB à l'aide du câble fourni avec l'appareil.

Vérifiez que le smartphone soit reconnu par Linux :
<code bash>
$ sudo dmesg | tail -30
[  591.444666] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 2320.016177] usb 6-2.7: new high-speed USB device number 6 using ehci-pci
[ 2320.112993] usb 6-2.7: New USB device found, idVendor=04e8, idProduct=6860
[ 2320.112999] usb 6-2.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2320.113002] usb 6-2.7: Product: SAMSUNG_Android
[ 2320.113005] usb 6-2.7: Manufacturer: SAMSUNG
[ 2320.113008] usb 6-2.7: SerialNumber: 01234567
[ 2320.143003] cdc_acm 6-2.7:1.1: This device cannot do calls on its own. It is not a modem.
[ 2320.143089] cdc_acm 6-2.7:1.1: ttyACM0: USB ACM device
[ 2320.145202] usbcore: registered new interface driver cdc_acm
[ 2320.145205] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2390.472134] usb 6-2.7: USB disconnect, device number 6
[ 2390.672161] usb 6-2.7: new high-speed USB device number 7 using ehci-pci
[ 2390.765576] usb 6-2.7: New USB device found, idVendor=18d1, idProduct=d002
[ 2390.765588] usb 6-2.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2390.765595] usb 6-2.7: Product: SAMSUNG_Android
[ 2390.765601] usb 6-2.7: Manufacturer: SAMSUNG
[ 2390.765606] usb 6-2.7: SerialNumber: 01234567
[ 2393.032153] usb 6-2.7: USB disconnect, device number 7
[ 2393.232244] usb 6-2.7: new high-speed USB device number 8 using ehci-pci
[ 2393.325276] usb 6-2.7: New USB device found, idVendor=04e8, idProduct=6866
[ 2393.325288] usb 6-2.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2393.325294] usb 6-2.7: Product: SAMSUNG_Android
[ 2393.325300] usb 6-2.7: Manufacturer: SAMSUNG
[ 2393.325306] usb 6-2.7: SerialNumber: 01234567
[ 2402.248149] usb 6-2.7: USB disconnect, device number 8
[ 2402.448171] usb 6-2.7: new high-speed USB device number 9 using ehci-pci
[ 2402.936079] usb 6-2.7: device not accepting address 9, error -71
</code>

Si ce n'est pas déjà fait, installer les outils de suivi USB :
<code bash>
$ sudo apt-get install usbutils
</code>
Allez voir du coté de la commande lsusb pour vérifier que votre appareil est détecté :
<code bash>
$ sudo lsusb
Bus 006 Device 013: ID 04e8:6860 Samsung Electronics Co., Ltd GT-I9100 Phone [Galaxy S II], GT-I9300 Phone [Galaxy S III], GT-P7500 [Galaxy Tab 10.1]
Bus 006 Device 005: ID 046d:c245 Logitech, Inc. G400 Optical Mouse
Bus 006 Device 004: ID 046a:0180 Cherry GmbH 
Bus 006 Device 003: ID 050d:0237 Belkin Components F5U237 USB 2.0 7-Port Hub
Bus 006 Device 002: ID 04f2:b073 Chicony Electronics Co., Ltd 
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
</code>
===== Communiquez avec le smartphone =====
Installez l'outil de communication avec les périphériques de type MTP (Media Transfer Protocol)
<code bash>
$ sudo apt-get install mtp-tools
</code>
Vérifiez que votre smartphone est bien raccordé à votre ordinateur en utilisant le protocole MTP :
<code bash>
$ sudo mtp-detect
Unable to open ~/.mtpz-data for reading, MTPZ disabled.
libmtp version: 1.1.8

Listing raw device(s)
Device 0 (VID=04e8 and PID=6860) is a Samsung Galaxy models (MTP).
   Found 1 device(s):
   Samsung: Galaxy models (MTP) (04e8:6860) @ bus 6, dev 13
Attempting to connect device(s)
Android device detected, assigning default bug flags

{...}
</code>